What You Can Do About Crawl Space Mold

For those of you who don't know, crawl space refers to the area underneath a house that allows access to wiring or plumbing. As its name suggests, it is a small area that you must crawl into and is not big enough for standing in. If you have one of these as part of your home, it is highly most likely you will find mold there. Crawl space mold is common, but it can be treated. These areas are prime locations for mold spores to grow because they are dark and moist. You can get rid of this mold with some time and effort.


First, kit yourself out in protective gear such as a mask, goggles, gloves and over clothes that can be discarded after use. Go into the space with a flashlight and evaluate the severity of the mold problem. If there is a small to moderate amount of mold, you can probably get rid of it yourself. If your crawlspace is all out infested, you may need to call professional mold removers to do the job. For those who decide to attack the problem themselves, there are some supplies necessary.

A dehumidifier is a good appliance to have, because it removes moisture from the air. You will also need more protective gear and clothing, something to scrape mold, plastic barriers, and cleaners specially designed to get rid of mold. There are liquid and foaming sprays that are made to kill and remove mold. Your plastic barrier can be put on the floor to catch mold that falls. Make sure to properly ventilate the area, with fans if possible. Next after applying the solution scrape the mold until it is off of the surface. Examples of simple tools for scraping mold include painter's knives and spatulas.

After the mold is scraped away, remove all the supplies and the plastic barrier. Make sure to discard these properly. Then you will want to rinse the area thoroughly until no traces of mold are left behind. The next step is to dry the area, which is where the fans, ventilation and dehumidifier come in. Moisture is the number one cause of mold, so drying out the crawl space and making sure it stays dry can prevent the problem from happing again. Thankfully, crawl space mold can be removed for good so get to it!






 

 

Secrets to Mold Removal - Click Here

 

 

 

 

Mold Removal News:

 

Mold at Juvenile Assessment Center in West Palm Beach poses health risk . - Orlando Sentinel

Mold at Juvenile Assessment Center in West Palm Beach poses health risk .
Orlando Sentinel
Among the recommendations listed in the memo: Replace drywall and repair windows that have water damage; remove wallpaper and get rid of mold; clean air-conditioning equipment; replace water-stained ceiling tiles; get rid of dead insects and hire .

and more »
..


58 new jobs on the way
Rochester, N.Y.based Century Mold Co. Inc. announced plans this morning for a $4.2 million expansion of its Shelbyville facility, on Blue Ribbon Parkway, which will add 58 manufacturing jobs. A...


Massie's depth outweighs Hill's passion
We initially expected someone in the..

2012 NFL Mock Draft: Dre Kirkpatrick and More Game-Changing First-Round Locks
Kirkpatrick is far from a sure bet to excel at the next level, but he certainly has the potential to be a shut-down corner in the..


Pumps still chugging in Montandon basements - Danville News

Pumps still chugging in Montandon basements
Danville News
"We have to pump water continuously, our basement floors are ruined, we can't get rid of the mold on the walls with all the moisture." The water problems, which began in spring, stopped briefly in summer, with the drought, Moser said.

..


Multi-Cycle Analysis Sets New Benchmark In Injection Molding Simulation
Using a completely 3D-approach and the integration of a highly developed thermal solver, the injection molding simulation software SIGMASOFT allows the calculation of multiple consecutive production cycles, considering the thermal interactions throughout all the components in the mold. The accuracy of the entire simulation is thus dramatically increased. Schaumburg, Illinois - SIGMA Plastic ...


Ask Angie: Getting rid of mold - Kansas City Star

Ask Angie: Getting rid of mold
Kansas City Star
By ANGIE HICKS I have traces of mold across parts of my basement walls. What is the best way to kill and remove it, and then to prevent it from coming back? Before you try to remove the mold, you should first figure out the source of the mold to .

and more »
..


Danforth Museum eyes Maynard Building - MetroWest Daily News

Danforth Museum eyes Maynard Building
MetroWest Daily News
The Danforth Museum of Art in Framingham is weighing a possible move as Town Meeting decides whether to spend $100000 to get rid of asbestos in the town-owned building. By Danielle Ameden/Daily News staff The Danforth Museum and School of Art says it .

and more »
..


 

 

Do It Yourself Mold Removal - Click Here

 

Many, if not all of the links on this website are affiliate links which means that we will be compensated if you choose to buy at some point in the near future. Please accept our sincere thanks for your support.


Technorati Tags: , ,